- Europe
- Amériques
- Asie et Moyen-Orient
- Afrique et Océanie
D 244 432 00 | Power supply terminals for E-bus
The D 244 432 00 power supply terminals are used to refresh the E-bus. Data is exchanged between the coupler and the EtherCAT Terminal over the E-bus. Each terminal draws a certain amount of current from the E-bus (see “current consumption E-bus” in the technical data).
This current is fed into the E-bus by the relevant coupler’s power supply unit. In configurations with a large number of terminals it is possible to use the D 244 432 00 in order to supply an extra 2 A to the E-bus. The D 244 432 00 has a diagnostic function which is displayed by LED and on the process image.
| Technical data | D 244 432 00 |
Technology | power supply terminal |
Short-circuit-proof | yes |
Input voltage | 24 V DC |
Input current | approx. 70 mA + (E-bus/4) |
Output voltage | 5 V for E-bus supply |
Max. output current | 2 A |
Current consumption E-bus | – |
Electrical isolation | – |
Power contacts | 24 V DC max./10 A max. |
Diagnostics in the process image | yes |
Special features | standard EL supply |
Weight | approx. 65 g |
Operating/storage temperature | 0…+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Pluggable wiring | for all ESxxxx terminals |
Approvals | CE, UL, Ex |
You can also find more documentation on the following site
