- Europe
- Amériques
- Asie et Moyen-Orient
- Afrique et Océanie
D 244 430 00 & D 244 431 00 | 2-channel serial interfacesRS232/RS422/RS485, D-sub connection
The D 244 430 00 and D 244 431 00 serial interfaces enable the connection of devices with two RS232 or two RS422/RS485 interfaces. The devices connected to the D 244 430 00 / D 244 431 00 EtherCAT Terminals communicate with the automation device via the Coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300baud up to 115.2kbaud. The RS232/RS422/RS485 interfaces guarantee high interference immunity through electrically isolated signals. The D 244 431 00 can provide 2x 5V/20mA out of the E-bus supply (electrically isolated, short-circuit-proof) for the supply of external devices.
In conjunction with the TwinCAT Virtual Serial COM Driver, the D 244 430 00 & D 244 431 00 can be used as a normal Windows COM interface.
| Technical data | D 244 430 00 |
Technology | D-sub, 9-pin |
Data transfer channels | 2 |
Data transfer rates | 300…115,200 baud; default: 9,600 baud, 8 data bits, no parity and one stop bit |
Interfaces | 2 x RS232 |
Line impedance | – |
Cable length | max. 15 m |
Providing external supply | – |
Power supply | via the E-bus |
Distributed clocks | – |
Electrical isolation | 500 V (E-bus/signal voltage) |
Data buffer | 864 bytes receive buffer, 128 bytes transmit buffer |
Bit width in the process image | 22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status |
Configuration | no address setting, configuration via the controller |
Current consumption power contacts | – |
Current consumption E-bus | typ. 170 mA |
Special features | 2 x 5 V/20 mA for external supply (EL6022) |
Weight | approx. 55 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Approvals | CE, UL, Ex |
| Technical data | D 244 431 00 |
Technology | D-sub, 9-pin |
Data transfer channels | 2 |
Data transfer rates | 300…115,200 baud; default: 9,600 baud, 8 data bits, no parity and one stop bit |
Interfaces | 2 x RS422/RS485 |
Line impedance | 120 Ω |
Cable length | approx. 1,000 m twisted pair |
Providing external supply | 2 x max. 5 V/20 mA, out of E-Bus supply, short-circuit-proof |
Power supply | via the E-bus |
Distributed clocks | – |
Electrical isolation | 500 V (E-bus/signal voltage) |
Data buffer | 864 bytes receive buffer, 128 bytes transmit buffer |
Bit width in the process image | 22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status |
Configuration | no address setting, configuration via the controller |
Current consumption power contacts | – |
Current consumption E-bus | typ. 270 mA |
Special features | 2 x 5 V/20 mA for external supply (EL6022) |
Weight | approx. 55 g |
Operating/storage temperature | -25…+60 °C/-40…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Approvals | CE, UL, Ex |
| Accessories | |
license for using the TwinCAT Virtual Serial COM Driver for Windows and Windows CE platforms | |
| System | |
For further RS485 products please see the system overview. | |
You can also find more documentation on the following site
