- Europe
- Americas
- Asia and Middle East
- Africa and Oceania
D 244 031 00 | HD EtherCAT Terminal, 8-channel digital input + 8-channel digital output 24VDC
The digital D 244 031 00 EtherCAT Terminal combines eight digital inputs and eight digital outputs in one device. The inputs have a filter of 3.0 ms. The outputs process load currents up to 0.5 A, are short-circuit-proof and protected against polarity reversal. The signal states are displayed by LEDs.
The reference ground for all inputs is the 0V power contact, the outputs are fed via the 24V power contact. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.
The HD EtherCAT Terminals (High Density) with increased packing density feature 16connection points in the housing of a 12mm terminal block.
| Technical data | D 244 031 00 |
Connection technology | 1-wire |
Specification | EN 61131-2, type 1/3 |
Number of channels | 8 inputs + 8 outputs |
Nominal voltage | 24 V DC (-15 %/+20 %) |
“0“ signal voltage | -3…+5 V (EN 61131-2, type 1/3) |
“1“ signal voltage | 15…30 V (EN 61131-2, type 3) |
Input current | typ. 3 mA (EN 61131-2, type 3) |
Input filter | typ. 3.0 ms |
Distributed clocks | – |
Load type | ohmic, inductive, lamp load |
Max. output current | 0.5 A (per channel) |
Reverse voltage protection | yes |
Breaking energy | < 150 mJ/channel |
Switching times | typ. T ON: 60 µs, T OFF: 300 µs |
Current consumption power contacts | typ. 15 mA + load |
Current consumption E-bus | typ. 130 mA |
Electrical isolation | 500 V (E-bus/field potential) |
Bit width in the process image | 8 inputs + 8 outputs |
Configuration
| no address or configuration setting |
Conductor types | solid wire, stranded wire and ferrule |
Conductor connection | solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver |
Rated cross-section | solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm² |
Special features | combi EtherCAT Terminal, 8 x output 24 V DC, max. output current 0.5 A, load type: ohmic, inductive, lamp load, reverse voltage protection |
Weight | approx. 65 g |
Operating/storage temperature | 0…+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable (see documentation) |
Approvals | CE, UL |
| RELATED PRODUCTS | |
EL1859 | EtherCAT Terminal, 8-channel digital input + 8-channel digital output |
You can also find more documentation on the following site
